Replaces TWO products!

Marine 31 Captain’s One-Step Compound & Polish cuts like a compound and finishes like a polish, replacing the need for a separate compound and polish. What’s the advantage of Captain’s One-Step Compound & Polish? Not only do you save money by only needing to purchase ONE product to compound AND polish your boat, but you save time as well! Marine 31 Captain’s One-Step Compound & Polish works especially well on painted hulls where most marine compounds and polishes tend to leave the finish hazy and full of swirl marks.

Marine 31 Captain’s One-Step Compound & Polish will be known in the marine industry as “magic in a bottle” thanks to its immense cutting ability and the swirl-free, glossy finish that it creates. Marine 31 Captain’s One-Step Compound & Polish works so well that you can use it on black hulls with confidence.

Marine 31 Captain’s One-Step Compound & Polish can be applied several ways. For heavy cutting action, use with a rotary polisher equipped with a wool pad. For light or moderate oxidation, use with a dual action polisher equipped with a foam pad. Regardless of your application method, Marine 31 Captain’s One-Step Compound & Polish will leave your boat looking glossier than it has ever been.

Cuts like a compound and finishes like a polish! Check out the glossy section of this BLACK painted hull in the picture above. The oxidation and sanding marks were effortlessly removed, and the finish wasn’t scoured or hazed in the process.

Marine 31 Captain’s One-Step Compound & Polish can be used to remove oxidation, staining, scuff marks, scratches, and swirl marks. If you don’t need a lot of cutting action, simply choose a less aggressive foam pad. The abrasives in Marine 31 Captain’s One-Step Compound & Polish are so refined that you can even apply it with a soft foam finishing pad to burnish the surface to an incredibly high gloss.

Marine 31 Captain’s One-Step Compound & Polish is arguably the best boat compound and polish ever made. The incredibly glossy, swirl-free finish that it creates will convince you, and the easy application will keep you coming back for more. Marine 31 Captain’s One-Step Compound & Polish doesn’t dust, and it wipes off like a wax.

Marine 31 Captain’s One-Step Compound & Polish is the one-step solution you’ve been asking for. Stop using multi-step systems and reap the benefits of good chemistry!

32 oz.

Marine 31 Captain’s One-Step Compound & Polish:

http://www.autogeek.net/best-boat-compound-polish.html

Semi-permanent paint protection made easy!

Optimum Gloss-Coat is a high-tech polymer system that forms an extra layer of clear coat over painted surfaces, wheels, plastic trim, bumpers, aluminum, and chrome. Formulated by award-winning Dr. David Ghodoussi, Optimum Gloss-Coat is designed to provide unsurpassed resistance to etching caused by harsh detergents, and swirl marks that are often inflicted during the wash process. Surfaces that are coated with Optimum Gloss-Coat will be protected for up to two years.

Optimum Gloss-Coat is much like the clear coat that already exists on your vehicle, except it forms a shell of protection that is glossier, slicker, and less prone to wash-induced swirl marks and marring. Optimum Gloss-Coat creates a self cleaning finish that is considerably easier to clean and maintain compared to conventional waxes and sealants. Carnauba-wax lovers rejoice – Optimum formulated Gloss-Coat so you can top it with your favorite non-abrasive finishing wax.

Optimum Gloss-Coat can be applied to all exterior surfaces. It is not recommended for glass since improper application can affect visibility. For other exterior surfaces, Optimum Gloss-Coat is a highly effective, transparent protective coating.

Optimum Gloss-Coat can be applied to:

• Painted surfaces
• Wheels
• Plastic trim
• Bumpers
• Aluminum & chrome surfaces

Optimum Gloss-Coat is an additional barrier between the elements and your vehicle’s paint. The paint will retain its color and contaminants will be blocked out to keep the paint smooth and clean. Unlike waxes and paint sealants that require frequent reapplication, Optimum Gloss-Coat provides constant, unyielding protection for up to two years!

Because Optimum Gloss-Coat is semi-permanent, the paint finish has to be properly prepared before applying it. Any blemishes or contamination on the paint will be locked in so remove them first! On a properly prepared paint finish, Optimum Gloss-Coat will look clear, smooth, and clean.

Once Optimum Gloss-Coat cures, washing is the only maintenance needed to keep your vehicle looking fantastic. The coating can be clayed but it should not be necessary since Gloss-Coat releases contaminants easily. Use detail sprays as desired to intensify the gloss. You can top the coating with your favorite non-abrasive wax or sealant if you desire.

Directions

1. Polish paint with Optimum Polish II or Optimum Hyper Polish to remove any defects.
2. Clean surface with 15% IPA solution to remove all polishing oils, waxes, and silicones.
3. Prime the applicator by making an X pattern across the pad. Only a few drops will be needed for each subsequent panel.
4. Wipe Optimum Gloss-Coat onto a single panel at a time in a thin layer using two directions, in a circular or front to back direction.
5. Within 5 minutes, inspect the panel with adequate lighting looking for any thick areas that have not flashed away to clear.
6. Use foam applicator or paint safe microfiber to even out any areas where you see streaks. This step is key, as any spots not leveled will have to be polished if allowed to cure. Panels will feel a bit tacky and will be self-leveling during cure time, so avoid any unnecessary touching, wiping, or contact to produce the best results.
7. Repeat steps 1-6 for each panel where application is desired.

10 cc

VISIT AUTOGEEK.NET TO GET YOUR OPTIMUM GLOSS-COAT PAINT COATING TODAY!

Go cordless! – This is the world’s first wireless random orbital car polisher!

Finally! Car wax lovers rejoice, Griot’s Garage is proud to introduce their 5 inch Lithium-Ion Random Orbital Polisher, the first battery powered car buffer and polisher the world has ever seen. Now you can polish and wax your vehicle at car shows, or simply enjoy the freedom of going wireless in your garage. No longer will you have to worry about tripping over extension cords. Unplug and reap the benefits of a wireless car buffer with the Griot’s Garage 5 inch Lithium-Ion Random Orbital Polisher!

Car care enthusiasts have been asking for a battery-powered car polisher for years, and until now nobody has faced the challenge of developing a safe, reliable, easy to use wireless car buffer. Griot’s Garage heard the cries of enthusiasts around the world and took the challenge of creating a battery-powered car buffer – the 5 inch Lithium-Ion Random Orbital Polisher.

The Griot’s Garage 5 inch Lithium-Ion Random Orbital Polisher is lightweight, making it easy to hold on to during extended polishing sessions. The ergonomic, palm-grip design places the power switch within reach of your finger, making the machine easy to turn on and off on the fly. The low-vibration motor won’t cause itchy hands, even after hours of use.

The Griot’s Garage 5 inch Lithium-Ion Random Orbital Polisher features a long-lasting 10.8 volt lithium-ion battery. This provides enough juice to wax an entire full-size SUV, like a Chevrolet Suburban or Ford Expedition. The polisher includes a charger that will charge a dead battery in about an hour. Extra batteries are available.

The Griot’s Garage 5 inch Lithium-Ion Random Orbital Polisher includes a 5 inch hook and loop backing plate. This backing plate is designed to accommodate 5.5 inch pads.

Lose the cord and enjoy the freedom of going wireless with the Griot’s Garage 5 inch Lithium-Ion Random Orbital Polisher.

Includes:
5 inch Lithium-Ion Random Orbital Polisher
5 inch hook and loop backing plate
One battery
Battery charger
Wrench
5.5 inch Black Foam Finishing Pad

Griots Garage 5 inch Lithium-Ion Random Orbital Polisher

http://www.autogeek.net/griots-garage-cordless-battery-powered-car-buffer-polisher.html

Detailer’s Power Wash is a high-foaming, wax-infused shampoo that gently removes dirt and road grime while adding real carnauba wax protection to your vehicle.  Detailer’s Power Wash is the only high-yield foaming auto shampoo that contains carnauba wax, increasing protection and shine after every wash.  The thick, rich foam created by Detailer’s Power Wash encapsulates dirt particles, eliminating the chance of wash-induced swirl marks and scratches.  Detailer’s Power Wash is the auto shampoo that does it all!

DP Power Wash cleans, shines, and protects! Real carnauba wax increases protection and shine every each wash.

Detailer’s Power Wash really excels when used in a foam gun or foam cannon.  This highly concentrated shampoo creates mounds of thick, frothy foam that explode out of your foam gun, covering your vehicle in what appears to be several inches of snow!  The high viscosity of Detailer’s Power Wash allows the suds to cling to the vehicle in order to begin grabbing dirt and oil on contact.  With the help of a soft, clean sponge or wash mitt, your vehicle will be squeaky clean with this super-sudsing, wax-infused wash.

Not all soaps are created equal, and Detailer’s Power Wash is proof.  Traditional car wash soaps require 5 ounces of solution per 5 gallon bucket of water.  Now GET THIS:  Only 2 ounces of Detailer’s Power Wash is needed to create several gallons of the thickest, slickest car wash solution you’ve ever used.  Not only is Detailer’s Power Wash extremely concentrated, it also contains real carnauba wax that increases both shine and protection after every wash.

Detailer’s Power Wash is pH-balanced to retain the existing wax protection on your vehicle.  A benefit of formulating this high-yield foaming auto shampoo with real carnauba wax is that it actually EXTENDS the life expectancy of your wax or sealant while restoring the shine and slickness after each wash.  This pH-balanced foaming auto shampoo is compatible with all waxes, sealants, and paint coatings.

DP Power Wash maximizes the performance of foam guns and foam cannons. With a daily driver that’s close to 20 feet long, the foam gun paired with the Montana Boar’s Hair Car Wash Brush is the only way Meghan washes her GMC Sierra!

The thick, froathy foam created by DP Power Wash releases dirt and grime.

DP Power Wash creates foam so thick it even clings to vertical surfaces!

Water spots are a problem that plagues car care enthusiasts living in regions with hard water.  Water softeners in Detailer’s Power Wash help offset the effects of hard water so your vehicle dries with fewer water spots.  These softening agents also allow the shampoo to achieve its full foaming potential.

Detailer’s Power Wash works for you to help eliminate wash-induced swirl marks and scratches by lubricating the surface with thick, frothy foam and lubricating oils.  These lubricants wrap around dirt and suspend it just above the paint surface, where it cannot scratch the paint. The oils nourish the paint to deepen the color and enhance the shine.

Inject some gloss into your wash with Detailer’s Power Wash!

Directions:

Foam Gun

1. Pour two ounces of DP Power Wash into the foam gun’s reservoir. Fill with 6-8 ounces of water. Shake well for maximum foam. Set the multi-ratio stem to the maximum foam output, which is the last notch.
   Note: the Autogeek, Pinnacle and DP Foam Guns all feature a quick connect between the hose nozzle and foam gun’s lid. Filling and shaking the foam gun is easier if you release this quick connect.
2. Turn the water on and coat the vehicle in foam, one section at a time. You can pre-soak the vehicle and then follow up with your wash mitt or follow along with your mitt as you spray the vehicle. Either method is effective.
3. Wash from the top of the vehicle down and rinse your mitt often to prevent swirls. Rinse the vehicle often. Use a Montana Boar’s Hair Car Wash Brush on larger vehicles.
4. Once the vehicle is washed and rinsed, dry it with a Cobra Guzzler Microfiber Waffle Weave Drying Towel to prevent water spots.

Wash Bucket

1. Pour 2-3 ounces of DP Power Wash into a 5 gallon wash bucket, such as the Pinnacle Complete Wash System. Activate foam with a strong jet of water.
2. Wash the vehicle as directed above.
3. Once the vehicle is washed and rinsed, dry it with a Cobra Guzzler Microfiber Waffle Weave Drying Towel to prevent water spots. Pictured to the right Meghan is using the Ultima Guzzler – it is our biggest drying towel and it even features pockets!

32 oz.

Made in USA

Get your Detailer’s Power Wash at Autogeek.net –> http://www.autogeek.net/dp300.html

For a limited time, receive a FREE Poly Foam Applicatorwith your purchase!

Restores, protects, and enhances exterior trim of any color!

BLACKFIRE Total Trim & Tire Sealant is the solution to an issue that plagues almost every vehicle manufactured in the last 30 years – dull, faded, and discolored plastic exterior trim.  This thick, gel-like formula penetrates deep into the pores of plastic, rubber, and vinyl exterior trim, restoring the finish to factory-new condition.  A traditional trim dressing might last a week or two if you’re lucky; BLACKFIRE Total Trim & Tire Sealant provides MONTHS of durable protection.  Use it on tires as a long-lasting, waterproof dressing!

Use to protect and enhance new or old trim.

BLACKFIRE Total Trim & Tire Sealant is far more than a trim dressing.  This polymer-based trim restorer forms a bond at the molecular level, restoring the surface while coating it in a durable, protective shell.  BLACKFIRE Total Trim & Tire Sealant doesn’t wash off in the rain – it actually causes water to bead up like a wax!  Treated surfaces will have a factory-fresh appearance – not a sticky, greasy mess like other so-called trim restorers.

Use BLACKFIRE Total Trim & Tire Sealant on moldings, bumpers, windshield cowlings, louvers, air vents, wiper arms, window trim, mudguards, side mirror housings, bed rails, door handles, and more!  The durable UV inhibitors block the sun’s damaging rays, keeping your trim looking new for months.

Restores, protects, and renews exterior trim of any color. Check out the trim on this Mercedes-Benz Sprinter. The left side is dull and faded; the right side has been restored using BLACKFIRE Total Trim & Tire Sealant. The difference is night and day!

BLACKFIRE Total Trim & Tire Sealant is a breeze to apply.  Its thick, gel-like formula spreads evenly and dries completely.  You can even BLACKFIRE Total Trim & Tire Sealant on hard and smooth surfaces.  If used on hard, smooth surfaces, buff the surface dry with a clean microfiber towel.  On tires, apply an even coat and allow to dry for 20 minutes before applying an additional coat.  Apply multiple coats to tires if you want a glossy, shiny appearance.

BLACKFIRE Total Trim & Tire Sealant restores, protects, and enhances exterior trim of any color.  This polymer-based trim restorer doesn’t contain any dyes or colorants.  The formula creates a finish that looks and feels like the day your vehicle was new.  BLACKFIRE Total Trim & Tire Sealant will not streak or wash off when it gets wet.  The only maintenance required is regular washing with a quality shampoo, like BLACKFIRE Wet Diamond Conditioning Shampoo.

Restore, protect, and enhance your trim and tires with BLACKFIRE Total Trim & Tire Sealant!

Tires BEFORE being coated with BLACKFIRE

Tires AFTER being coated with BLACKFIRE

Directions:

Clean the surface to be treated with BLACKFIRE All In One All Purpose Cleaner. Ensure surface is completely dry to the touch prior to application of BLACKFIRE Total Trim & Tire Sealant.

Apply BLACKFIRE Total Trim & Tire Sealant to desired surface using a foam or microfiber applicator. If applying to tires, use a foam tire applicator. Apply a nickel-sized amount to applicator and spread a thin, even coat over the surface. Immediately buff surface dry with a microfiber towel. If used on tires, allow to dry before driving.

8 oz.

BLACKFIRE Total Trim & Tire Sealant

http://www.autogeek.net/plastic-trim-restorer.html

Two year protection – wipe on-walk away

Duragloss Enviroshield Ceramic Coating System is an easy-to-use paint coating that provides longer lasting paint protection than any wax or paint sealant. Duragloss Enviroshield Ceramic Coating System protects your vehicle’s paint from the damaging effects of acid rain, UV rays, salt, and environmental pollutants for up to two years. The strong bond created by the paint coating provides maximum durability in any environment. Duragloss Enviroshield Ceramic Coating System includes everything you need to prep and coat your vehicle.

Duragloss Enviroshield Ceramic Coating System includes:

4 oz. Duragloss Nanoglass Ceramic Coating
Duragloss Nanoglass Ceramic Coating seals and protects your vehicle’s paint from the damaging effects of acid rain, UV rays, salt, and environmental contaminants for up to two years. Duragloss Nanoglass Ceramic Coating is resistant to alkaline cleaners and degreasers, offering maximum paint protection in any environment.

4 oz. Duragloss Squeaky Clean Surface Prep
Duragloss Squeaky Clean Surface Prep is the most critical step in the Enviroshield Ceramic Coating System. This non-abrasive, silicone-free polish removes surface residue, imbedded dirt, old waxes and dried-on polish residue to allow the proper bonding of the Nanoglass Ceramic Coating. This will allow maximum durability from the Nanoglass Ceramic Coating.

2 Applicator Pads
These foam and microfiber double-sided applicator pads make for quick, easy application of both Squeaky Clean Surface Prep and Nanoglass Ceramic Coating. Use the microfiber side with Squeaky Clean Surface Prep to remove old wax and polish residue; use the foam side to apply Nanoglass Ceramic Coating.

1 Microfiber Towel
This flat-weave microfiber towel is perfect for buffing off Squeaky Clean Surface Prep once it has dried to a haze. Durable construction means this towel can be washed and reused. Does not leave lint fibers on paint.

Kit includes:
4 oz. Duragloss Nanoglass Ceramic Coating
4 oz. Duragloss Squeaky Clean Surface Prep
2 Applicator Pads
1 Microfiber Towel

Gently removes road film, dirt, and grime from exterior surfaces

CarPro Reset Intensive Car Shampoo is a specially formulated shampoo that is designed to gently release dirt and grime without damaging the underlying coating – ie: Cquartz or any other quartz-based nano coating. CarPro Reset Intensive Car Shampoo is extremely concentrated; only an ounce of shampoo is required for an entire 5 gallon bucket of water! CarPro Reset Intensive Car Shampoo creates mounds of thick suds that rinse cleanly off the vehicle.

CarPro Reset Intensive Car Shampoo is formulated with intelligent pH surfactants that give Reset the cleaning ability of a alkaline-based detergent, without compromising the water beading or protection of the underlying coating. CarPro Reset Intensive Car Shampoo will not alter the water beading or sheeting characteristics of the underlying coating.

Benefits of CarPro Reset:

• Developed for use with all CarPro Nanotechnology Sealants and Coatings including Reload, Hydro2, and CQuartz.* .
• No gloss enhancers, No polymers, No wax inside.
• Intelligent pH Surfactants provide a strong cleaning and foaming action, whilst remaining mild and pH-Neutral (7) in use.
• Derived almost entirely from natural, organic and biodegradable ingredients; free from the harsh sodium and lauryl sulfate derivatives found in many shampoo products.
• 1:500 Dilution ratio allows for very economical cleaning.
• Excellent lubrication and fresh smelling Aqua Marine scent make for a safe, and enjoyable wash experience.
• Can be used as Snow foam shampoo as well.

Safely remove dirt and grime with CarPro Reset Intensive Car Shampoo!

500 ml.