Britemax Amethyst Quartz Ceramic Coating

Ultra-durable 7H nano-crystalline coating!

Britemax Amethyst Quartz Ceramic Coating is an ultra-durable, extremely hydrophobic ceramic paint coating that protects for up to 2 years! The unique nano-crystalline coating protects against UV rays, dirt, dust, and other exterior contaminants and creates a water repellent barrier on your surface. Safe for use on almost all exterior surfaces, including clear coats, gel coats, plastics, vinyl, rubber, metal, chrome, and glass, Britemax Amethyst Quartz Ceramic Coating is an easy and long-lasting way to keep your paint shining protected for years!

The signs of a quality paint coating fall into a couple different categories – length of protection, strength of protection, and quality of shine imparted. Britemax Amethyst Quartz Ceramic Coating excels in all of these categories! With a hardness rating of 7H (a diamond’s rating is 10H!), Britemax Amethyst Quartz Ceramic Coating is 2-3 micron thick and helps promote scratch-resistancy on your car’s clear coat.

The extreme hydrophobic properties Britemax Amethyst Quartz Ceramic Coating imparts on your paint gives the coating a “self-cleaning” ability. Rather than being allowed to sit on the surface, dirt and dust is immediately swept off of the surface when in contact with water. Britemax Amethyst Quartz Ceramic Coating is also extremely slick, allowing nothing to stick to the surface!

Coating your car is one of the best options out there in terms of appearance and protection. Britemax Amethyst Quartz Ceramic Coating provides the best of all coating properties – durability, strong protection, and incredible shine.

Britemax Amethyst Quartz Ceramic Coating features a high flash point, making it perfect for first time users! Britemax Amethyst Quartz Ceramic Coating contains 5 microfiber suede applicator towels and a foam applicator block.

Directions for use:

  • For the best results of Britemax Amethyst Quartz Ceramic Coating, fully wash and decontaminate your vehicle before application. If necessary, remove swirls and scratches.
  • If paint imperfections are not severe, you can prep the surface using Britemax Virtue Si02 to remove light swirls and scratches and get the surface ready for coating.
  • Apply a few beads of product onto the suede microfiber towel wrapped applicator and apply in straight lines with a 50% overlap onto areas approximately 3×3 sq. ft. or less at a time.
  • Allow coating to flash (approximately 2-6 minutes) before using a clean and soft microfiber towel to buff away.
  • If applying an additional layer, wait 1 hour between coatings.
  • Do not let the treated surface get wet for 12-24 hours to allow for proper curing.
  • To maintain Britemax Amethyst Quartz Ceramic Coating, use Britemax Remax Si02 Hydrophobic Spray Sealant.

50 ml.

Click Here – https://www.autogeek.net/britemax-amethyst-ceramic-coating.html

Speak Your Mind