Archives for February 2009

Advanced fasteners hold pads securely while you work!Upgrade your backing plates to the Cyclo ProGuard Orbital Backing Plates! These backing plates replace the rubber pad holders. ProGuard Backing Plates screw directly into the Cyclo Polisher. Each backing plate has a rubber edge to guard the paint against impact, and the heavy duty fasteners have twice the grip of standard hook and loop fasteners. Use the Cyclo ProGuard Orbital Backing Plates with all Cyclo 4 inch pads.

The Cyclo ProGuard Orbital Backing Plates are so advanced, they make the Cyclo even easier to use. The old Cyclo pad system consists of rubber boots that fit snugly over two orbiting heads. The pads attach to the rubber boots.

The Cyclo ProGuard Orbital Backing Plates screw directly into the Cyclo polisher, like standard backing plates. ProGuard Backing Plates have a slimmer profile than the rubber boot configuration, making the ProGuard plates lighter and more agile. The Cyclo ProGuard Orbital Backing Plates have a 5/16” thread, which fits most orbital polishers. Use these backing plates with any 4 inch pads.

The Cyclo ProGuard Orbital Backing Plates are designed with your vehicle’s safety in mind. The rubber bumper around the curved edge protects the vehicle from impact. The Cyclo ProGuard Orbital Backing Plate is slightly smaller than the diameter of the Cyclo 4 inch pads to provide ¼ inch of foam around the perimeter of the plate. This edge of foam provides additional protection against accidental impact.

The Cyclo ProGuard Orbital Backing Plates have an incredible grip. They hold onto pads and won’t let go! The backing plates and pads are held together with hook and loop fasteners. The Cyclo ProGuard Orbital Backing Plates feature mushroom hooks. This design creates dozens of double hooks, which provide twice as much grip as standard hook and loop fasteners. The strong hold prevents pads from flying off during use. You can be confident that the Cyclo ProGuard Orbital Backing Plates will hold onto pads until you remove them.

New Cyclo ProGuard Orbital Backing Plates

Cyclo ProGuard Orbital Backing Plates work with all 4 inch foam and wool pads. These backing plate screw directly into the Cyclo polisher in place of the orbiting heads that come standard on the Cyclo.

Protect your vehicle as you polish with Cyclo ProGuard Orbital Backing Plates. The backing plates have soft rubber edges, an advanced fastener system, and a rugged design to make polishing with the Cyclo easier than ever.

3 ¾ inch diameter
5/16 thread

Dakota Products, Inc. specializes in innovative and effective odor removal products for cars, homes, offices and more. Dakota’s air fresheners and odor control products are trusted by professional detailers and consumers to permanently eliminate odors in vehicles, homes, boats, offices, and anywhere else that malodors occur.

Dakota Products, Inc. is based in Sioux Falls, South Dakota, where they manufacture, package and ship all Dakota odor control products to maintain a high standard of quality.
The search is over! Non-Smoke Smoke Odor Eliminator is the product you’ve been looking for. This unique odor eliminator changes the molecular structure of offensive odors and neutralizes them. Non-Smoke Smoke Odor Eliminator seeks out tobacco smoke odors and other malodors and destroys them. Non-Smoke is more than an air freshener – it completely eliminates odors on a molecular level. As the fragrance fades, the smoke smell will not come back!

Use Non-Smoke to neutralize smoke odor in a used car or camper, in hotel rooms, in your home, and at the office. Non-Smoke Smoke Odor Eliminator permanently eliminates malodors and leaves the area smelling fresh. If you’ve struggled with a lingering smoke smell, eliminate it once and for all with Dakota Non-Smoke Smoke Odor Eliminator.

[Read more…]

USB cable included.

Today’s vehicles have curves! A standard flat pad just doesn’t cut it. Lake Country’s Kompressor Pads are designed to hug the paint, conforming to the car’s every curve. With an old-fashioned flat pad, you lose surface contact on the fenders and bumper because the pad is unable to adjust to the curves of the vehicle. Because so much of the pad is coming off the paint, you’re more likely to sling polish.

Kompressor pads are easy to clean. The slotted pad face actually makes it easy to clean Kompressor pads. Just arch the pad and you can easily use a brush or your fingers to agitate between the tabs.

Kompressor foam pads are available in four varieties:

Lake Country’s Kompressor Foam Pads are designed for today’s sleek and curvy vehicles. No other pad hugs the curves and contours of your vehicle to give you maximum surface contact like a Kompressor pad. Try out the Kompressor line of foam pads with your dual action or rotary polisher. The 7 inch pads work perfectly with Lake Country’s 6 inch flexible backing plates.